CSSU SUPPLIES: SUTURES (P.R. NO. 2026-10-1834)

CSSU SUPPLIES: SUTURES (P.R. NO. 2026-10-1834) Item Description ABC Unit Quantity 1 SUTURE, POLYDIOXANONE 1-0, NEEDLE 1/2" TAPER NEEDLE, 36-48 MM NEEDLE LENGTH, AT LEAST 70 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 313,800.00 PIECE 523.00 2 SUTURE, POLYDIOXANONE 1-0, NEEDLE 1/2" TAPER NEEDLE, 36-48 MM NEEDLE LENGTH, AT LEAST 70 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 551,600.00 PIECE 788.00 3 SUTURE, POLYDIOXANONE 6-0, ROUND BODIED NEEDLE 1/2" TAPER NEEDLE, 13-16 MM NEEDLE LENGTH, AT LEAST 45 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 439,200.00 PIECE 366.00 4 SUTURE, POLYGLECAPRONE 2-0, NEEDLE 1/2", TAPER POINT , 26MM TO 36MM NEEDLE LENGTH, AT LEAST 45CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 40,320.00 PIECE 72.00 5 SUTURE, POLYGLECAPRONE 3-0, NEEDLE 1/2", TAPER POINT, 26 MM TO 36 MM NEEDLE LENGTH, AT LEAST 70 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 18,000.00 PIECE 24.00 6 SUTURE, POLYGLECAPRONE 4-0, NEEDLE 1/2", TAPER POINT, 17 MM TO 22 MM NEEDLE LENGTH, AT LEAST 70 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 18,240.00 PIECE 24.00 7 SUTURE, POLYGLECAPRONE 4-0, NEEDLE 3/8", CUTTING NEEDLE, 17 MM TO 22 MM NEEDLE LENGTH, AT LEAST 45 CM SUTURE LENGTH, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 86,250.00 PIECE 115.00 8 SUTURE, POLYPROPYLENE 7-0, NEEDLE 3/8", TAPER POINT , 8MM TO 9.3MM NEEDLE LENGTH, AT LEAST 45CM SUTURE LENGTH, MONOFILAMENT NON-ABSORBABLE, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 69,600.00 PIECE 24.00 9 SUTURE, POLYPROPYLENE 3-0, NEEDLE 1/2" ROUND BODY, 16MM TO 26MM NEEDLE LENGTH, AT LEAST 75CM SUTURE LENGTH, MONOFILAMENT NON-ABSORBABLE, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 53,940.00 PIECE 58.00 10 SUTURE, POLYPROPYLENE 4-0, NEEDLE 1/2" ROUND BODY, 16MM TO 26MM NEEDLE LENGTH, AT LEAST 90CM SUTURE LENGTH, MONOFILAMENT NON-ABSORBABLE, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 52,000.00 PIECE 40.00 11 SUTURE, POLYPROPYLENE 6-0, NEEDLE 1/2" ROUND BODY, 13 MM TO 17 MM NEEDLE LENGTH, AT LEAST 45 CM SUTURE LENGTH, MONOFILAMENT NON-ABSORBABLE, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 75,600.00 PIECE 56.00 12 SUTURE, POLYPROPYLENE 6-0, NEEDLE 3/8" ROUND BODY, 9 MM TO 10 MM NEEDLE LENGTH, AT LEAST 45 CM SUTURE LENGTH, MONOFILAMENT NON-ABSORBABLE, STERILE, ANTIBACTERIAL INDIVIDUALLY PACKED 253,840.00 PIECE 152.00 TERMS OF REFERENCE FOR PRODUCT DELIVERY PR# 2026-10-1834 Must provide at least three (3) Certificates of Product Usage and Good Standing from Level 3 Hospitals of all sutures. Delivery shall be made through staggered deliveries based on the available warehouse storage capacity as determined by the Warehousing Unit. The Warehousing Unit shall issue a Delivery Instruction Form indicating the required quantity and the corresponding delivery period. The Supplier shall deliver the specified quantity within the delivery period indicated in the Delivery Instruction Form and shall not exceed the prescribed delivery period. Payment shall be processed upon complete delivery, inspection, and acceptance of the quantity specified in the corresponding Delivery Instruction Form. 2. The authorized representative should notify the Materials Management Section personnel at least three (3) days before the delivery arrives for proper warehousing management. 3. For deliveries made through courier, the supplier shall properly coordinate and provide prior notice to the Materials Management Section (MMS), including confirmation that the shipment has been arranged and is scheduled for delivery. 4. In cases where the supplier’s authorized representative is not present during delivery, the Inspectorate Committee in coordination with the Materials Management Section personnel shall proceed with the inspection of the delivered items. Any damage, shortage, discrepancy, or non-conformity identified during inspection shall place the acceptance of the delivery on hold until the supplier’s authorized representative is present to witness and acknowledge the inspection findings. Such inspection and handling of the delivery shall relieve the Procuring Entity, Inspectorate Committee, and Materials Management Section (MMS) personnel from any liability arising from the receipt, opening, and inspection of the package in the absence of the supplier’s authorized representative. The supplier shall remain fully responsible for replacing any damaged, defective, missing, or non-conforming items in accordance with the contract at no additional cost to the procuring entity. 5. The supplier shall ensure that all deliveries are properly handled and transported using its own personnel or authorized representatives. The procuring entity and its personnel shall not be responsible for any hauling, loading, unloading, or handling of the goods from the point of delivery. Any damages, losses, or discrepancies arising from improper handling or transportation shall be the sole responsibility of the supplier. 6. A copy of Purchase Order (PO) must be presented during delivery to ascertain which specific PO the item(s) corresponds to, especially in cases where bidders are awarded with multiple contracts. 7 Any product with an expiration date must have a minimum shelf life of eighteen (18) months from the date of delivery. If the product’s shelf life is less than 18 months, the supplier shall submit a guarantee letter, duly approved by the Medical Center Chief, confirming replacement of the item at least three (3) months before its expiration. Deliveries without the required guarantee letter will be outright rejected. 8. All items to be delivered must be securely packed in cardboard boxes, especially loose items, to protect the contents from damage and ensure cleanliness. Each box must be properly labeled with essential information such as the manufacturing date, expiration date, temperature requirements, and lot number. For loose items, the packaging must also include a clear label indicating “Loose Packaging” along with the corresponding quantity contained inside. 9. Strictly for items that require an SDS, a Safety Data Sheet (SDS) in the standard 16-section format must be submitted upon delivery. The SDS must have been issued or last revised within the past five (5) years; otherwise, it must be accompanied by a duly signed certification from the manufacturer or its authorized distributor/importer confirming that no changes have been made to the product information. Failure to submit the required SDS will automatically place the processing of the voucher for payment on hold until full compliance is achieved. Pre-bid Conference Date Time Venue 12/11/2026 9:00 AM at the REODICA HALL which can also be viewed via GOOGLE MEET with the following details: Join with Google Meet: Link: https://meet.google.com/emq-rtig-ihe Other Information Kindly see attached Public Bidding Documents Created by Ma. Christina C. Pabicon Date Created 29/10/2026 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party. ©&nbsp2004-2026 DBM Procurement Service. All rights reserved. Help | Contact Us | Sitemap