Supply, Delivery, and installation of Machinery and Equipment for the Engineering Program (JBA-10-2026-246)

ABC: 21,407,000.00 Closing: Nov 24,2026 Delivery: 90 days Source: NEP Prebid: Nov 12,2026 1 Lot VENTURIMETER APPARATUS Venturimeter : Material Clear Acrylic, Compatible to 1" Dia pipe Orificemeter: Material Clear Acrylic, Compatible to 1" Dia. Pipe Water Circulation : FHP Pump Flow Measurement : Using Measuring Tank, Capacity 25 Ltrs. Sump Tank : Capacity 50 Ltrs. Stop Watch : Electronic Control Panel: On / Off Switch, Mains Indicator etc. Tanks will be made of Stainless Steel Electricity Supply: Single Phase, 220 VAC, 0.5 kW With water supply drain 1 unit 54,000.00 FLUME TILTING A 76mm wide, 250mm high open channel for use with an Hydraulics Bench Available in 2.5m and 5.0m working section lengths Clear acrylic sides to give visibility of the working section A jacking system permits the slope of the channel bed to be adjusted between -1% and +3% Inlet tank with flow stilling arrangement Includes a Venturi, sharp and broad-crested weirs, 2 vernier level gauges, adjustable undershot weir and crump weir Wide range of other models available as accessories. Optional flow meter Comprehensive instruction manual Attachments: Set of Weirs Material: Stainless Steel Rectangular Weir / Notch: Features a 50 mm wide slot or 30x100mm / 50x100mm rectangular openings. Triangular (V-Notch) Weir: Supplied with 30°, 60°, and 90° notch angles (Thomson weir) for low-flow sensitivity. Trapezoidal (Cipolletti) Weir: Standard 1:4 side slope configuration. Hook & point gauge: 0–150 mm, ±0.1 mm 1 unit 485,000.00 HYDRAULICS BENCH Circulating Pump: Submersible Max head: 8.3m H²O Max flow: 80 litres/min (using volumetric tank) Max flow: 100 litres/min (using appropriate accessory) Motor rating: 0.25kW Sump tank capacity: 250 litres High flow volumetric tank: 40 litres Low flow volumetric tank: 6 litres Height of working surface: 1m above floor level Includes Armfield’s F1-aBASIC software Includes manual Length: 1.13m Width: 0.73m Height: 1.0m 1 unit 400,000.00 WATER HAMMER SET Test pipes: Stainless steel, 20.2 mm inside diameter, Test pipe length: 3 m long Surge shaft clear acrylic, 40 mm inside diameter, 800 mm high Head tank PVC, capacity 45 liters L x W x H: 3500-x800 x 1600 mm With attachments: Pressure gages Maximum Pressure Measurement: 40 bar Minimum Pressure Measurement: 0 bar Connection Size: G ¼ Connection Location: Bottom Entry 1 unit 500,000.00 Soil Mechanics Machinery And Equipment For Civil Engineering SET OF SIEVES 12” diameter sieves with stainless mesh Brass frames with rolled edges Extended skirts for nesting Sizes of sieves: 75.0 mm (3 in.) 37.5 mm (1½ in.) 19.0 mm (¾ in.) No. 4 No. 10 No. 20 No. 40 No. 60 No. 80 No. 100 No. 200 Pan Cover Attachments: Bristle Brush (6 units) Width: 3" Bristle Length: 51mm Thickness: 12mm Plastic Handle 3 units 90,000.00 DRYING OVEN, THERMO. CONTROLLED Forced Air Drying Oven Structure design LCD display Built-in temperature deviation calibration function, parameter memory function, with call parameters automatic recovery function Timing Settings Accurate control of heating time, timing range 0~9999 minutes(hours), timing error≤1% Independent Fan Switch Independent fan switch, according to the heating needs to decide whether to start Unique mandatory fan cooling ventilation structure, ensure the fan working temperature is less than 50°C Exterior Design Novel vertical design, shell with electrostatic spraying steel plate, corrosion resistant and durable Optional Foot Master casters are available for more convenient movement Three-dimensional Circulation Air Duct Unique bottom air blast and bottom heating reasonable cooperation Vertical double duct vertical hot air circulation design The temperature is uniform to meet the requirements of high-precision experiments Capacity: 30L Temp. Range: RT+10℃~300℃ Temp. Precision: 0.1℃ Temp. Uniformity: ≤Max Temp.±2.5％ Circulation Mode: Bottom heating, forced convection Timing Range: 0~9999min/h Shelves No.(pc): 2 Display: LCD Power Supply: 100~245V, 50/60Hz Internal Size(mm): 310*310*310 External Size(mm): 440*670*495 With calibration certification and 1 year warranty Attachment: Automatic Voltage Regulator 5000W Parameters: Input voltage: 150-250V (1P) Output voltage: 220V and 110V Stabilization accuracy: 220V±3% and 110V±6% Frequency: 50Hz/60Hz Debug time: ≤1s (with the input voltage variation of 10%) Overload power factor: 0.8 Efficiency: ≥90% Dielectric strength: 1,500V/min Voltage over voltage: 246±4V Ambient temperature: -10±40°C Relative humidity: ≤95% Temperature rise: lower than 60°C Wave form distortion: no additional wave form distortion Insulation resistance: ≥2MΩ When the voltage fluctuates or the load varies, automatic sampling control circuit will send a signal to drive the servo motor which can adjust the position of carbon brush, then the output voltage will be adjusted to rated value and get a steady state. 1 unit 107,000.00 SAMPLE DIVIDER / SPLITTER (SET) Length: 2.15 meters Designed for 5/8-11 adapters for prism mounting (includes the adapter set) Twist lock system with adjustable bubble level 2-sections; inner aluminum pole with dual graduations: 10ths and metric 1 unit 91,000.00 Electrical Engineering Machinery And Equipment ELECTROMECHANICAL TRAINING SYSTEM One integrated workstation-based system for practical experiments in DC power circuits, single-phase AC circuits, three-phase AC circuits, power factor correction, three-phase rotating machines, single-phase power transformers, three-phase transformer banks, and permanent-magnet DC machines. Include a tabletop/workstation and mobile storage cabinet; power supplies; four-pole squirrel-cage induction motor; synchronous motor/generator; permanent-magnet DC motor/machine; single-phase and three-phase transformer components; transformer bank; resistive, inductive, and capacitive loads; synchronizing module/three-phase contactor; lead-acid battery pack; timing belt; connection lead set; digital multimeter; four-quadrant dynamometer/power supply; data acquisition and control interface; and all necessary interconnections and safety accessories. 1 set 4,000,000.00 DISSECTIBLE MACHINES TRAINING SYSTEM One complete system for assembly and disassembly of representative electrical machines. Include workbench, user guide, at least two assembly housing modules, a set of dissectible machine parts, timing belt, necessary assembly hardware, and all components required to demonstrate machine construction and operating principles safely. 1 set 2,300,000.00 ELECTRICAL MACHINES SIMULATION SOFTWARE Educational simulation software for electrical machines and related experiments, with a perpetual license for at least fifteen (15) users, as stated in the supplier's proposal. Include installation media or access method, license/activation information, user documentation, and instructional resources. Bidder shall disclose supported operating systems, hardware requirements, license restrictions, update policy, and any recurring fees. If the procuring entity requires a higher number of simultaneous users, the required user count must be stated in the bidding documents before procurement. 1 1 package / license 700,000.00 MANUALS AND INSTRUCTIONAL MATERIALS Student manuals and instructor guides for power factor correction, DC power circuits, single-phase AC power circuits, three-phase AC power circuits, three-phase rotating machines, single-phase power transformers, three-phase transformer banks, and permanent-magnet DC machines, plus the user guide for dissectible machines. Manuals may be printed or supplied in an accessible digital format. 1 complete set - ACCESSORIES, INSTALLATION, AND COMMISSIONING All required leads, connectors, cables, adapters, protective devices, mounting hardware, tools, software configuration, and incidental materials needed for safe operation and completion of the specified experiments. Supplier shall install, configure, test, commission, and demonstrate the complete system at the designated laboratory. 1 lot - INSTRUMENTATION AND CONTROL TRAINING SYSTEM PROCESS AUTOMATION TRAINING SYSTEM – BASIC One complete training set for practical laboratory exercises in process automation and measurement. Include one aluminium profile plate (350 × 200 × 20 mm), two tanks, one flow meter, one pump, one tool set, one tabletop power supply unit, one pipe and tubing cutter, and one Process Automation workbook. PROCESS AUTOMATION TRAINING SYSTEM – ADVANCED One complete advanced training set for sensor applications, process measurement, and control. Include one I/O board, two capacitive sensors, one ultrasonic sensor, one magnetic-inductive flow sensor, one pressure sensor (0–400 mbar), one 2/2-way solenoid valve, one USB interface module, one I/O data cable, one parallel analogue cable, one trolley with mounting plate, and process automation closed-loop control software with a perpetual license for one (1) user. 1 lot 2,600,000.00 Mechanical Engineering Machinery and Equipment CNC Machine Simulation for Milling and Turning Licensed teaching software capable of both 2-axis turning and 3-axis milling simulation; G/M code editing, toolpath visualization, collision/overtravel warnings, work and tool offsets, virtual setup and assessment exercises. Include offline operation or documented connectivity, installation media, licensing terms, updates and instructor training. State number of student and instructor seats, license duration, compatible operating system, hardware requirements and whether any physical controller is included. 1 unit 4,000,000.00 FLUID MECHANICS TRAINER Self-contained recirculating hydraulic bench with reservoir, pump, calibrated flow measurement and quick-connect supply/return. Base lot to include experiments for Bernoulli principle, flow measurement (Venturi/orifice), pipe friction and minor losses, and impact of jet. Include gauges/manometers, hoses, drain, data sheets and at least six laboratory exercises. Supplier to list each module and its measurable range; University to approve number of student groups. 1 unit 3,000,000.00 MILLING MACHINE Conventional knee/turret type; longitudinal X travel ≥600 mm, cross Y travel ≥250 mm and vertical Z travel ≥350 mm; spindle taper R8, ISO30 or equivalent with widely available tooling; variable/stepped spindle speeds, quill feed, coolant and work light. Include vise, clamping kit, collet set, arbor and starter end mills; guards, emergency stop and electrical interlocks as supplied. Demonstrate face milling, slotting and drilling. 1 unit 1,200,000.00 SHAPER MACHINE Adjustable ram stroke ≥300 mm; Swiveling tool head; Automatic cross feed; Speed selection and adjustable stroke position; Rigid table with T-slots; Emergency stop, belt/gear guards, no-voltage restart protection. Demonstrate flat surface and keyway cutting on steel; Include vise, tool holders and starter cutting tools. 1 unit 1,000,000.00 FLASH AND FIRE POINT APPARATUS Cleveland open cup configuration for determining both flash and fire point of suitable petroleum products, conforming to ASTM D92 or equivalent method; controlled electric heating; calibrated temperature sensing; test flame/ignition provisions, cup and draft shield; 220–240 V, 60 Hz compatibility. Include operating procedure, calibration certificate, spare cup and safety instructions. University to confirm that open-cup testing is the required course experiment. 1 set 700,000.00 Note: 12% VAT included; Cost of Delivery and Installation Included; One (1) year warranty TOTAL P 21,407,000.00 REQUESTED BY: (SGD) ENGR. JUNBELITO B. ALTAMARINO Dean, College of Engineering/ End User OK as to fund: (SGD) MARY CHRIS T. ALABASTRO AO V (Budget Officer III) APPROVED BY: (SGD) STEVEN J. SUMAYLO, Ph.D. SUC President II Pre-bid Conference Date Time Venue 12/11/2026 10:00 AM SSC Meeting Hall A and/or through video conferencing via zoom link https://us06web.zoom.us/j/87653881130?pwd0u9eMF4YwfefYc7JYsyYSjS95ypaJR7.1 Other Information Attached are the following documents: Purchase Request Invitation to Bid Terms of Reference Created by Michael Vencynth H. Braga Date Created 30/10/2026 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party. ©&nbsp2004,2004-2026 DBM Procurement Service. All rights reserved.,DBM Procurement Service. All rights reserved. Help | Contact Us | Sitemap