1 lot fittings for ROP

1. 646 Pcs ½” Ball Valve / Stop Cock Ball Type-Lock Wing (Threaded) - Elements of the valve should be free from dirt, and there should not be any dirt, chip, burrs, and flakes etc. before assembling. - The threaded parts of the socket should be coated with sealing glue. - The valve should not present block to the circulation of closing and opening, and it should be flexible. - When the valve is fully open, the degree of the body axis and ball axis should be less than 3 degrees. - Seal test should be carried and testing pressure should not be less than 0.6Mpa. - The valve should be turned off during delivery. Materials Body: CW617N ; Bonnet: CW617N Ball: Hpb57-3 ; Ball Seat: PTFE SM031 Stem: Hpb57-3 ; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel ₱810.00 / pc 2. 243 Pcs 1” Ball Valve / Stop Cock Ball Type-Lock Wing (Threaded) - Elements of the valve should be free from dirt, and there should not be any dirt, chip, burrs, and flakes etc. before assembling. - The threaded parts of the socket should be coated with sealing glue. - The valve should not present block to the circulation of closing and opening, and it should be flexible. - When the valve is fully open, the degree of the body axis and ball axis should be less than 3 degrees. - Seal test should be carried and testing pressure should not be less than 0.6Mpa. - The valve should be turned off during delivery. Materials Body: CW617N ; Bonnet: CW617N Ball: Hpb57-3 ; Ball Seat: PTFE SM031 Stem: Hpb57-3 ; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel ₱1,605.00 / pc 3. 18 Pcs 1” Check Valve, Class 125 Screwed Cap, swing type disc, Threaded ends, WOG, Non-Shock, 1.38Mpa (200 psi), Saturated steam pressure (SSP), 0.86Mpa (125 psi) Materials: Body: bronze / brass; Cap:brass / bronze; Hinge pin: brass / stainless steel; Disc: brass ₱1,370.00 / pc 4. 29 Pcs Gate Valve, 1”Ø, threaded type Features: Brass Body, Non-Rising stem, Screw-over bonnet, Threaded ends Specifications: Nominal pressure: 200 psi Handwheel: Aluminum Body: Forge Brass Size / Length (L) mm / Inside Diameter mm / Diameter mm / Height mm 1” / 55 / 25 / 51 / 101 ₱753.00 / pc 5. 9 Pcs Gate Valve, 2”Ø, threaded type Features: Brass Body, Non-Rising stem, Screw-over bonnet, Threaded ends Specifications: Nominal pressure: 200 psi Handwheel: Aluminum Body: Forge Brass Size / Length (L) mm / Inside Diameter mm / Diameter mm / Height mm 2” / 72 / 47 / 80 / 159 6. 24 Pcs HDPE Coupling 2”Ø (63mm) Body: Polypropylene, high grade copolymer Split Ring: Acetal; Liner: Acetal, o-ring fixed inside; Seal: Nitrile Rubber NBR ₱1,807.00 / pc 7. 256 Pcs HDPE Poly BST Elbow 1”Ø Body: Polypropylene, high grade copolymer Split Ring: Acetal; Liner: Acetal, o-ring fixed inside; Seal: Nitrile Rubber NBR ₱381.00 / pc 8. 24 Pcs Tapping Saddle 6”Ø x 1”Ø Body: Polypropylene, high grade copolymer Nuts: Polypropylene, high grade copolymer Split Ring: Acetal (POM); Seal: EPDM; Bolts: Plated Steel; Nuts: Stainless steel, filled with self boring mechanism made of brass that will function as a valve; O-Ring of outlet fixed inside the body. Threads must conform to ISO – 7/1, BS21 – 1973, DIN 2999, NEN 3258, AS 1722 part. 1-1975. Quality conforms to ISO-9002. ₱9,914.00 / pc x x x x x Note: Not to be awarded on a one (1) lot basis. Quoted price should be inclusive of delivery fees, taxes, and other incidental costs. This is a Competitive Bidding: Envelope “A” to contain the following; among others: a) A refundable bid bond in the form of cash, Manager's or Cashier's check equivalent to 2% or surety bond callable on demand issued by a surety or insurance company duly certified by the Insurance Commission equivalent to 5% of the total approved budget cost is required for a total purchase bid amount of ₱50,000.00 and above. Validity of the surety bond is 120 days from the date of opening of bids OR Bid Securing Declaration regardless of amount of bid; b) Terms of payment, delivery, warranty, bid validity and complete specifications; c) Brochure/s (Original); d) Proof of payment of a non-refundable fee of ₱5,000.00 ; otherwise bids shall not be opened e) Certificate of Authorized Distributorship / Dealership issued by the Principal Supplier to the participating bidder (with red ribbon) if none has been submitted to the BAC in its Accreditation; ◦ For bidders who have foreign principal suppliers, the BWD-BAC shall accept an Apostilled Certificate of Authorized Distributorship / Dealership issued by a competent authority of the host government in lieu of the Certificate of Authorized Distributorship / Dealership (with red ribbon), except for non-contracting countries to the Apostille Convention, which still require the red ribbon requirement. ◦ For locally produced / manufactured products, only a certificate of Authorized Distributorship / Dealership w/o red ribbon is required if applicable; f) ISO Certificate issued to the principal supplier/participating bidder for the offered material or equipment brand name (if none has been submitted to the BAC in its Accreditation); g) International Certificate of Warranty. Envelope “B” to contain the bid cost per unit. Pre-bid conference: October 19, 2026 9:30am via Zoom Application Meeting ID: 452 718 8447 Password: 9Buvqr Pre-bid Conference Date Time Venue 19/10/2026 9:30 AM Pre-bid conference: October 19, 2026 9:30am via Zoom Application Meeting ID: 452 718 8447 Password: 9Buvqr Created by Ma. Luisa C Tenedero Date Created 09/10/2026 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party. ©&nbsp2004-2026 DBM Procurement Service. All rights reserved. Help | Contact Us | Sitemap