PVC pipes and elbows

1. 376 Pcs 2”Ø x 6m PVC Pipe with Carbon Steel Ring Class 150 / Series 8 PVC Pipe Specification: Nominal OD = 63 mm OD (Tolerance) = 63.30 mm Minimum Socket Depth = 97 mm Effective length = 6.0 meters Wall thickness = 3.6 – 4.16 mm ₱1,200.00 / pc 2. 199 Pcs 3”Ø x 6m PVC Pipe with Carbon Steel Ring Class 150 / Series 8 PVC Pipe Specification: Nominal OD = 90 mm OD (Tolerance) = 90.30 mm Minimum Socket Depth = 107 mm Effective length = 6.0 meters Wall thickness = 5.2 – 5.92 mm ₱2,500.00 / pc 3. 50 Pcs 6”Ø x 6m PVC Pipe with Carbon Steel Ring Class 150 / Series 8 PVC Pipe Specification: Nominal OD = 160 mm OD (Tolerance) = 160.50 mm Minimum Socket Depth = 131 mm Effective length = 6.0 meters Wall thickness = 9.2 – 10.32 mm ₱6,500.00 / pc 4. 5 Pcs 6”Ø x 45° PVC Elbow with Carbon Steel Ring single hub ₱6,400.00 / pc 5. 5 Pcs 6”Ø x 22.5° PVC Elbow with Carbon Steel Ring single hub ₱5,500.00 / pc PVC Pipe Specifications: Machine-Installed Fixed Seal: The built-in seal shall be made of pure EPDM with multi-coated Carbon Steel Ring Mechanical Properties: a) Hydrostatic Pressure: The pipe shall conform with the applied pressure for the hydrostatic pressure tests of PNS 65:1993 when tested in accordance with ISO 1167-1 and ISO 1167-2. b) Resistance to External Blows (Impact test): True Impact test (TIR) shall not exceed 10%, where TIR = Total number of breaks / Total number of blows, when tested in accordance with ISO 3127. c) Flattening: The pipe shall not show evidence of splitting, cracking or breaking when flattened to a minimum of 40% of its outside diameter when tested in accordance with ASTM D2241. Markings: The pipes shall be clearly marked with the following information: - Name of Product - Nominal outside diameter, mm - Series and/or Nominal Pressure, MPa - Manufacturer’s name and/or recognized trademark - The words “Made in the __________” - The words “For Potable Water” x x x x x Note: Not to be awarded on a one (1) lot basis. Delivery: 25 working days upon receipt of Purchase Order. Quoted price should be inclusive of delivery fees, taxes, and other incidental costs. This is a Competitive Bidding: Envelope “A” to contain the following; among others: a) A refundable bid bond in the form of cash, Manager's or Cashier's check equivalent to 2% or surety bond callable on demand issued by a surety or insurance company duly certified by the Insurance Commission equivalent to 5% of the total approved budget cost is required for a total purchase bid amount of ₱50,000.00 and above. Validity of the surety bond is 120 days from the date of opening of bids OR Bid Securing Declaration regardless of amount of bid; b) Terms of payment, delivery, warranty, bid validity and complete specifications; c) Brochure/s (Original); d) Proof of payment of a non-refundable fee of ₱5,000.00 ; otherwise bids shall not be opened e) Certificate of Authorized Distributorship / Dealership issued by the Principal Supplier to the participating bidder (with red ribbon) if none has been submitted to the BAC in its Accreditation; ◦ -For bidders who have foreign principal suppliers, the BWD-BAC shall accept an Apostilled Certificate of Authorized Distributorship / Dealership issued by a competent authority of the host government in lieu of the Certificate of Authorized Distributorship / Dealership (with red ribbon), except for non-contracting countries to the Apostille Convention, which still require the red ribbon requirement. ◦ -For locally produced / manufactured products, only a certificate of Authorized Distributorship / Dealership w/o red ribbon is required if applicable; f) ISO Certificate issued to the principal supplier/participating bidder for the offered material or equipment brand name (if none has been submitted to the BAC in its Accreditation); g) International Certificate of Warranty. Envelope “B” to contain the bid cost per unit. Pre-bid conference: October 20, 2026 9:30am via Zoom Application Meeting ID: 452 718 8447 Password: 9Buvqr Pre-bid Conference Date Time Venue 20/10/2026 9:30 AM Pre-bid conference: October 20, 2026 9:30am via Zoom Application Meeting ID: 452 718 8447 Password: 9Buvqr Created by Ma. Luisa C Tenedero Date Created 11/10/2026 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party. ©&nbsp2004-2026 DBM Procurement Service. All rights reserved. Help | Contact Us | Sitemap