Pre-Bid Conference
Known from stored extractionA specific pre-bid conference is identified in the procurement notice.
This means the requirement is present in the stored extraction. It does not mean your company satisfies it.
Buying agencyPROVINCE OF CAVITE
Bid Brief
Stored notice data. Confirm all decisions with the official documents.
The stored deadline is approaching. Confirm the official deadline before investing more time.
Use the supporting sections below to verify the evidence.
Compare stored requirements with evidence from this browser. Unknown answers stay as Needs verification.
Checking the stored deadline…
Add only the evidence relevant to this bid, or screen with unknown answers.
Not assessed yet
Stored category: Construction Equipment
Specifications: Engine: Type: water-cooled, 4 cycle Aspiration: turbocharged, aftercooled Number of cylinders: 6 Bore x stroke: 107mm x 124mm 4.21" x 4.88" Piston displacement: 6.69 ltr 408 in³ Governor: all-speed, electronic Horsepower: SAE J1995: gross 127 kW 171 HP ISO 9249/SAE J1349*: Net 125 kW 167 HP Rated RPM: 2000 rpm Fan drive method for radiator cooling: hydraulic Fuel system: direct injection Lubrication system: method: gear pump, force lubrication filter: full-flow type Air cleaner: dry type with double elements and dust evacuator, plus dust indicator *net horsepower at the maximum speed of radiator cooling fan is 117 KW 156 HP Transmission: Type: hydrostatic, 1 pump, 2 motors with speed range select Travel speed (km/h mph): measured with 20.5-25 tires Axles and Final Drives: Drive system: four-wheel drive Front: fixed, semi-floating Rear: center-pin support, semi floating, 24° total oscillation Reduction gear: spiral bevel gear Differential gear: torque proportioning Final reduction gear: planetary gear, single reduction Brakes: Service brakes: hydraulically actuated, wet multiple-disc brakes actuate on four wheels Parking brake: wet, multiple-disc brake on transfer output shaft Emergency brake: parking brake is commonly used Steering System: Type: full-hydraulic power steering Steering angle: 38.5° each direction (40° end stop) Minimum turning radius at the center of outside tire: 5380 mm 17'8" Hydraulic System:
Hydraulic pump: gear type pump Capacity: 172 ltr/min 45.4 U.S. gal/min at rated rpm Relief valve setting: 20.6 MPa 210 kgf/cm² 2,990 psi
Type: double-acting, piston type Number of cylinders: 2 Bore x stroke: 70mm x 453 mm 2.8" x 17.8"
Hydraulic pump: gear type pump Capacity: 61 ltr/min 16.1 U.S. gal/min Relief valve setting: 20.6 MPa 210 kgf/cm² 3,000 psi
Type: double-acting, piston type
Lift cylinder: 2- 140mm x 740mm 5.5" x 29.1" Bucket cylinder: 1- 160mm x 532mm 6.3"x20.9" Control valve: 2-spool type
Boom: raise, hold, lower, and float Bucket: tilt-back, hold, and dump Service Refill Capacities: Cooling system: 25 ltr 6.6 U.S. gal Fuel tank: 245 ltr 64.7 U.S. gal Engine: 23 ltr 6.1 U.S. gal Hydraulic system: 89 ltr 23.5 U.S. gal Axle (each front and rear): 24 ltr 6.3 U.S. gal Torque converter and transmission: 6.5 ltr 1.7 U.S. gal
Inclusions: free training for operations & maintenance personnel Delivery days: 30 days TERMS AND CONDITIONS:
warranty or until it reaches 6000hrs, whichever comes first, from the date of acceptance by the Provincial Government of Cavite
Familiarization Program included
-Provide Certificate from the Manufacturer/ Distributor or Importer as proof of existence in the Market.
a. Name of Service Center, Address, Telephone Number b. Actual photo of service center c. Actual photo of equipment needed for the services d. Organizational chart (List of Personnel) of their Service Center
Specifications: Engine: Piston Displacement: 2.189L Type: direct injection Max Loading Height: 5.515m Number of cylinders: 4 Other Specs: w/ cab & AC & front dozer blade Operating Weight: 4.795T Size: L:5.22cm, W: 1.96m, H:2.55m Bucket Capacity: 0.14cu.m Shoe Size: 400mm Breaker Line: Yes Performance: Travel Speed: 4.6km/h (Hi), 2.8km/h (Lo) Swing speed: 9 min⁻¹ Ground pressure: 3.6 PSI Max. Traction force: 4280kg Gradeability: 30 deg. Bucket digging force: 3460 kg Arm crowd force: 2200 kg Electric System: Operating Voltage: 12V Battery: 72 Ah Alternator: 40 A Starter: 2.3 kW Blade (WxH): 6'5" x 1'x2" ft.in. Drive System: Drive method: hydrostatic Type of travel brake: hydraulic lock type Type of travel shoe: rubber Undercarriage: Adjustmernt of the track tension: grease Number of shoes (for each side): 39 (steel) Number of carrier rollers (for each side): 1 Number of track rollers (for each side): 4 Hydraulic System: Type of hydraulic pump: variable capacity x2, gear x1 Max. oil flow: 53.5 x 2 + 33.8 L/min Hydraulic motor: variable capacity x2 (travel), fixed capacity x1 (swing) Max. pressure setting: 3840 PSI Auxiliary hydraulic flow: 70 L/min Refilling Capacity: Fuel Tank: 65 L Hydraulic Tank: 20 L Engine: 7.5 L Coolant: 8.5 L Inclusions: free training for operations & maintenance personnel Delivery days: 30 days TERMS AND CONDITIONS: 1.Warranty: The vehicle shall be covered by a 2 year warranty or until it reaches 3000hrs, whichever comes first, from the date of acceptance by the Provincial Government of Cavite
-Provide Certificate from the Manufacturer/ Distributor or Importer as proof of existence in the Market.
a. Name of Service Center, Address, Telephone Number b. Actual photo of service center c. Actual photo of equipment needed for the services d. Organizational chart (List of Personnel) of their Service Center
Invitation to Bid for this project is also posted at www.cavite.gov.ph Pre-bid Conference Date Time Venue 21/10/2026 1:00 PM BAC Conference Room, Upper Ground Floor, Cavite Government Center (New Provincial Capitol Building) Brgy. San Agustin, Trece Martires City, Cavite 4109 Created by RACHELLE ALANO CRON Date Created 05/10/2026 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party. © 2004-2026 DBM Procurement Service. All rights reserved. Help | Contact Us | Sitemap
This presentation only restructures stored source text. It does not add quantities, specifications, or delivery terms.
These checks organize what BidAssistant found. “Known from stored extraction” describes the source record, not your company’s eligibility. Unknowns remain verification items.
A specific pre-bid conference is identified in the procurement notice.
This means the requirement is present in the stored extraction. It does not mean your company satisfies it.
Oct 14, 2026, 12:00 AM
Nov 4, 2026, 1:30 PM
4 days leftOct 14, 2026, 2:36 AM
Oct 14, 2026, 2:36 AM
These are stored timestamps. A missing pre-bid or other procurement date is not shown.
Open the stored PhilGEPS source link
Freshness: First saved / captured Oct 14, 2026, 2:36 AM; last database update Oct 14, 2026, 2:36 AM.
New notices are collected periodically, but this service does not routinely refresh already-known notices. Stored dates and status may miss deadline extensions, cancellations, or amendments. Always check the latest official PhilGEPS notice. First-saved and last-update times describe our stored record, not a fresh check of the official notice.
BidAssistant PH is an independent discovery and screening aid, not PhilGEPS or a procuring agency.